Yes. I did it like this. no positive results.
log dlms:
14:00:22 Initializing serial connection.
14:00:23 Send SNRM request.
7E A0 08 02 23 C9 93 E4 43 7E
14:00:28 Failed to receive reply from the device in given time.
14:00:28 Disconnect request
14:00:28 Send Disconnect request.
7E A0 08 02 23 C9 53 E8 85 7E
14:00:33 Failed to receive reply from the device in given time.
System.TimeoutException: Failed to receive reply from the device in given time.
в GXDLMSDirector.GXDLMSDevice.InitializeConnection()
в GXDLMSDirector.MainForm.Connect(Object sender, GXAsyncWork work, Object[] parameters)
log iec:
14:02:01 Initializing serial connection.
14:02:02 HDLC sending:/?!<CR><LF>
14:02:12 Failed to receive reply from the device in given time.
System.Exception: Failed to receive reply from the device in given time.
в GXDLMSDirector.GXDLMSDevice.InitializeConnection()
в GXDLMSDirector.MainForm.Connect(Object sender, GXAsyncWork work, Object[] parameters)
What optical head you are using? Your meter is supporting DLMS and our customers read them but do not use an optical port. Check your optical head and make sure that it's using correct modulation (IEC 65056-21).
We have several different optical heads. Cheap ones are causing problems. ANSI heads don't work with DLMS meters. If you want to make it work right away, buy head from Kamstrup. It's working very well with different meters.
what am I doing wrong?
what am I doing wrong?
Hi,
Hi,
Change "Start Protocol" from DLMS to IEC.
BR,
Mikko
Yes. I did it like this. no
Yes. I did it like this. no positive results.
log dlms:
14:00:22 Initializing serial connection.
14:00:23 Send SNRM request.
7E A0 08 02 23 C9 93 E4 43 7E
14:00:28 Failed to receive reply from the device in given time.
14:00:28 Disconnect request
14:00:28 Send Disconnect request.
7E A0 08 02 23 C9 53 E8 85 7E
14:00:33 Failed to receive reply from the device in given time.
System.TimeoutException: Failed to receive reply from the device in given time.
в GXDLMSDirector.GXDLMSDevice.InitializeConnection()
в GXDLMSDirector.MainForm.Connect(Object sender, GXAsyncWork work, Object[] parameters)
log iec:
14:02:01 Initializing serial connection.
14:02:02 HDLC sending:/?!<CR><LF>
14:02:12 Failed to receive reply from the device in given time.
System.Exception: Failed to receive reply from the device in given time.
в GXDLMSDirector.GXDLMSDevice.InitializeConnection()
в GXDLMSDirector.MainForm.Connect(Object sender, GXAsyncWork work, Object[] parameters)
No answer. Maybe it's in the
No answer. Maybe it's in the optician-usb converter? what is needed? on which chip?
Do you get to connect to
Do you get to connect to Israemeco am550?
Can there isrameko something
Can there isrameko something changed in the start-protocol?
my converter on FT232
Hi,
Hi,
What optical head you are using? Your meter is supporting DLMS and our customers read them but do not use an optical port. Check your optical head and make sure that it's using correct modulation (IEC 65056-21).
62056-21?
62056-21?
do you use what?
do you use what?
Hi,
Hi,
We have several different optical heads. Cheap ones are causing problems. ANSI heads don't work with DLMS meters. If you want to make it work right away, buy head from Kamstrup. It's working very well with different meters.
BR,
Mikko