Hello I 'm trying to retrieve the time profile of the active energy injected and withdrawn . Among the Obis codes in the Director I was not able to try a find . I wanted to load other codes based on the SL7000 Manual . I went on the new button Obis I chose generic profile but the program does not allow me to upload my code. I can add their Obis by program or you can do it only you to code?
Thank you
Select Refresh from File menu. That will retreave all objects from the meter.
OBIS code description might be wrong, because SL 7000 is using own OBIS codes, not standard one.
param string [S=/dev/ttyUSB0, c=16, s=1, i=IEC, g=1.2.0:1, t=Info]
0
Device is IEC
Authentication: None
ClientAddress: 0x10
ServerAddress: 0x1
Connection Establish....
Data send failed. Try to resend 1/3
Data send failed. Try to resend 2/3
Data send failed. Try to resend 3/3
Failed to receive reply from the device in given time.
New Obis Code
Hi,
Select Refresh from File menu. That will retreave all objects from the meter.
OBIS code description might be wrong, because SL 7000 is using own OBIS codes, not standard one.
BR,
Mikko
Ok Thanks
Ok Thanks
please give me sample code for secure apex meter
i am getting
param string [S=/dev/ttyUSB0, c=16, s=1, i=IEC, g=1.2.0:1, t=Info]
0
Device is IEC
Authentication: None
ClientAddress: 0x10
ServerAddress: 0x1
Connection Establish....
Data send failed. Try to resend 1/3
Data send failed. Try to resend 2/3
Data send failed. Try to resend 3/3
Failed to receive reply from the device in given time.
Apex meter
Hi,
Please, create a new topic if you have new question.
What is model of the meter?
BR,
Mikko